Compare Temblor Subwoofer Models
The Temblor™ T8 and T10 are similar in many respects. The T10 is designed primarily for studio use. While also suitable for the studio, the T8’s input/output configuration and general design make it a particularly good choice for use with small monitors such as the PreSonus® Ceres™ BT-series and Eris E4.5 full-range speakers and in home stereo and home theater systems.
| Temblor T8
| Temblor T10
|
MAIN COMPONENTS | | |
Transducer | 8”, downward firing | 10”, front-firing |
Acoustic Port | Rear-firing bass reflex (round) | Front-firing bass reflex |
FEATURES | | |
Input Gain Control | Yes | Yes |
Variable Lowpass Filter | Yes | Yes |
Built-In Crossover | Yes | Yes |
Switchable Highpass Filter | Yes | Yes |
Momentary Footswitch (Bypass) | No | Yes |
Polarity Invert | Yes | Yes |
Ground-Lift Switch | No | Yes |
Class AB Amplification | 200W | 250W |
INPUTS AND OUTPUTS | | |
Main Inputs | - 2- Balanced ¼” TRS
- 2- Unbalanced RCA
| - 2- Balanced XLR
- 2- Balanced ¼” TRS
- 2- Unbalanced RCA
|
Main Outputs | - 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
2- Unbalanced RCA (full range with 80 Hz HPF option)
| - 2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
|
Subwoofer Output (connect a second subwoofer) | — | 1- Balanced XLR |
PHYSICAL | | |
Width | 10.2” (260 mm) | 12.6” (320 mm) |
Depth | 12.6” (320 mm) | 15.75” (400 mm) |
Height | 11” (280 mm) | 15.75” (400 mm) |
Weight | 21.2 lbs (9.6 kg) | 39.46 lbs (17.9 kg) |
Main components
- T8: 8-inch, downward-firing, glass-composite low-frequency transducer
- T8: Round, rear-firing, bass-reflex acoustic port
- T10: 10-inch, front-firing, glass-composite low-frequency transducer
- T10: Front-firing, bass-reflex acoustic port
Controls and filters
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- T10: Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert
- T10: Ground-lift switch
Power and safety
- T8: 200 watt, Class AB amplification
- T10: 250 watt, Class AB amplification
- Internal damping and heat sink
- Integrated rubber feet for stable placement
Inputs and outputs
- T8: Left and right, balanced ¼” TRS and unbalanced RCA main inputs
- T10: Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
- T8: Left and right, balanced ¼” TRS and unbalanced RCA outputs
- T10: Left and right balanced XLR and ¼” TRS outputs
- T10: XLR subwoofer output for connecting a second T10
Temblor® T8
Temblor® T10
Inputs
- 2- Balanced ¼” TRS
- 2- Unbalanced RCA
- 2- Balanced XLR
- 2- Balanced ¼” TRS
- 2- Unbalanced RCA
Outputs
- 2- Balanced ¼” TRS (full range with 80 Hz HPF option
- 2- Unbalanced RCA (full range with 80 Hz HPF option)
- 2- Balanced XLR (full range with 80 Hz HPF option)
- 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
- 1- Balanced XLR (Sub Out)
Performance
Frequency Response30 Hz – 200 Hz20 Hz – 200 HzLow Pass Filter Frequency50 – 130 Hz (variable)50 – 130 Hz (variable)Signal-to-Noise Ratio>98 dB (A weighted)>98 dB (A weighted)THD0.05%0.019% @ power <160WAmplifier Power200W peak, 100W RMS250W peak, 170W RMSPower Consumption120W230WAmplifier TypeClass ABClass ABPeak SPL at 1m104 dB113 dBWoofer8” glass-composite, downward-firing10” glass-composite, front-firingAcoustic PortRear-firing bass reflex (round)Front-firing bass reflex
User Controls
Input Gain Range-30 to +6 dB-30 to +6 dBPolarity Switch0° or 180°0° or 180°Low Pass Filter Control50 Hz to 130 Hz50 Hz to 130 HzGround Lift Switch
—
On/OffHigh Pass Filter SwitchOn/OffOn/OffBypass Footswitch
—
On/Off
Protection
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
Power
100-120V ~50/60 Hz or 220-240V ~50/60 Hz100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Cabinet
Vinyl-laminated MDFVinyl-laminated MDF
Physical
Width10.2” (260 mm)12.6” (320 mm)Depth12.6” (320 mm)15.75” (400 mm)Height11” (280 mm)15.75” (400 mm)Weight21.2 lbs (9.6 kg)39.46 lbs (17.9 kg)
T8 T10