WL2082-i line array

• Installation-optimized design brings affordable and uncompromised line array performance to a broader range of venues
• Compact and attractive appearance, available in black and white, harmonizes with any installation environment
• Wide 140° horizontal coverage
• Economical and easy-to-install suspension system with ample array adjustability
  
  
  
  

  ILA Series v2
  SPECIFICATIONS	WL2082-i	WL118-sw
  Configuration	2½ way, biamp or triamp	Vented box
  Transducers   High Frequency    Low Frequency	Dual 50 W 8Ω 1" exit, 1.75" titanium diaphragm, neodymium magnet assembly Dual 200 W 16Ω 8" woofers, 2" voice coils, neodymium magnet assemblies, weather resistant cone	-- 850 W, 8Ω 18" woofer with a 4" voice coil, ceramic magnet assembly
  Frequency Response (±3 dB)	80 Hz - 20 kHz	32 Hz - 200 Hz
  Frequency Range (-10 dB)	68 Hz - 22 kHz	29 Hz - 800 Hz
  Nominal Impedance	HF: 16Ω LF biamp mode: 8Ω LF triamp mode: 16Ω (×2)	LF: 8Ω
  Sensitivity	HF: 106 dB LF: 97 dB (4 V @ 1 m)	98 dB (2.83 V @ 1 m)
  Continuous Power Capacity 1	HF: 100 W LF biamp mode: 400 W LF triamp mode: 200 W (×2)	LF: 850 W
  Recommended Power	HF: 200 W LF biamp mode: 800 W LF triamp mode: 400 W (×2)	LF: 1750 W
  Maximum Output (dB SPL at 1 m)    Continuous / Peak	HF: 126 dB / 132 dB  LF: 122 dB / 128 dB	LF: 128.5 dB / 134.5 dB
  Nominal Coverage	Horizontal 140 degrees  Vertical: dependent on number of elements used
  Cabinet Type	Ported, elliptical / trapezoidal	Vented subwoofer
  Enclosure Material	HIPS (high impact polystyrene) with UV protectant	18 mm Baltic Birch Plywood
  Finish	Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable	Available in black (WL118-sw BLK) or white (WL118-sw WHT) paintable
  Grille	Perforated, formed aluminum	16 gauge powder-coated steel with cloth backing
  Connectors	2 x NL-8 in parallel	2 x NL8 in parallel / 2 x NL4 in parallel
  Pin Outs	Pins Bi-amp Tri-amp 1+/1- NC NC 2+/2- NC LF2 3+/3- LF LF1 4+/4- HF HF	NL8 Pins   1+/1- Sub 2+/2- Pass thru 3+/3- Pass thru 4+/4- Pass thru NL4 Pins   1+/1- Sub 2+/2- Pass thru
  Attachment Points	Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10°	Integral, non-adjustable (straight array only)
  Dimensions	11.8" H x 27" W x 13.4" D (300 mm x 686 mm x 340 mm)	22.1" H x 27.6" W x 30.3" D  (562 mm x 702 mm x 771 mm)
  Weight	37 lb (16.8 kg) net 45 lb (20.45 kg) shipping	111 lb (50.4 kg) net 121 lb (55 kg) shipping
  Accessories Available	FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white. EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white. PB2082-i: Pullback bar for WL2082-i. Pulls the bottom of the array back to achieve the desired angle. Available in black or white. AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually. GS115-sw: Ground stack kit for WL118-sw or WL115-sw. QRP-KIT-1: Kit of four quick-release pins for use in lieu of included bolts.

  
  
  ¹ 2 hours, IEC specified noise 
  
  All specifications are subject to change without notice.